Taking care of your car’s paint isn’t just about regular washing. A high-quality ceramic coating can protect your vehicle from harsh Phoenix sun and keep it looking showroom-new for years.
Adam’s Advanced Graphene Ceramic Coating offers superior protection with technology that bonds at the molecular level to your car’s paint surface.
To apply Adam’s Advanced Graphene Ceramic Coating, you’ll need to first ensure your car is thoroughly cleaned and polished, then apply the coating using a microfiber applicator in a cross-hatch pattern, and finally allow it to cure for the recommended time. This process creates a hydrophobic layer that repels water, dirt, and UV rays while adding incredible gloss.
We at Ceramic Coating Phoenix understand the unique challenges our Arizona climate presents for vehicles. That’s why we recommend this advanced graphene-infused product that withstands extreme temperatures better than traditional coatings. The investment in proper application pays dividends in both protection and appearance for your vehicle.
Preparation and Surface Cleaning
Proper preparation is the foundation of a successful ceramic coating application. The cleaner your vehicle’s surface, the better the Adam’s Advanced Graphene Ceramic Coating will bond and perform over time.
Surface Prep Essentials
Before applying any ceramic coating, we need to ensure the paint is in optimal condition.
At Ceramic Coating Phoenix, we recommend starting with a thorough paint correction process if your vehicle has visible scratches or swirls in the clear coat.
This step may include:
- Compounding for deeper scratches
- Polishing to remove fine swirls and enhance gloss
- Clay bar treatment to remove embedded contaminants
A clay bar with proper lubrication will remove bonded contaminants that washing alone cannot eliminate. This step is crucial as even microscopic particles can prevent the graphene ceramic coating from properly bonding to the surface.
Cleaning and Degreasing
After paint correction, we must remove all polishing oils and residues with a proper surface prep solution.
We recommend using an IPA (isopropyl alcohol) mixture or Adam’s surface prep product specifically designed for this purpose.
First, wash your vehicle with a pH-neutral car wash soap to remove loose dirt and debris. Dry thoroughly with a clean microfiber towel to prevent water spotting.
Next, spray the surface prep directly onto a panel or onto a fresh microfiber towel.
Wipe the panel thoroughly, then use a second dry microfiber towel to remove any remaining residue.
This two-towel method ensures we remove all oils, waxes, and silicones that could interfere with the ceramic bonding process. Pay special attention to areas like door jambs, around badges, and other crevices where residue often hides.
Application Process and Aftercare
Proper application and maintenance are crucial for getting the most out of Adam’s Advanced Graphene Ceramic Coating. Following the correct techniques ensures maximum durability and protection for your vehicle’s surfaces.
Applying the Coating
Before application, ensure your vehicle is thoroughly washed, dried, and free of contaminants. We recommend polishing the surface first to remove any imperfections.
Start by applying a few drops of the coating to your applicator pad.
Work in small sections of about 2×2 feet using cross-hatching motions, overlapping each pass by 25-50%.
Let the product flash (about 1-3 minutes depending on temperature) until you see a rainbow effect on the surface. Then use a clean, high-quality microfiber towel to gently remove excess product.
For best results:
- Apply in a controlled environment (60-75°F)
- Avoid direct sunlight during application
- Wear nitrile gloves to prevent skin contact
- Don’t rush the process—precision matters
The advanced formula can be applied to painted surfaces, wheels, chrome, and headlights for comprehensive protection.
Maintenance and Care
To maintain your graphene coating, we recommend following a specific care routine. Proper maintenance ensures the SiO2/graphene protective coating performs optimally for years.
Wash your vehicle regularly using pH-neutral car wash soap. Avoid automatic car washes with harsh brushes that can damage the coating. When cleaning wheels, use a dedicated wheel cleaner that’s safe for coated surfaces.
For routine maintenance:
- Rinse thoroughly before washing to remove loose dirt
- Use the two-bucket method to prevent swirl marks
- Dry with a clean microfiber towel to prevent water spotting
- Apply a ceramic boost spray every 3-4 months
If you notice the coating’s hydrophobic properties diminishing, maintenance products can restore these effects. This is normal over time.
In Phoenix’s harsh sun, park in shade when possible to protect the coating from extreme heat and UV exposure.
Frequently Asked Questions
Adam’s Advanced Graphene Ceramic Coating offers superior protection for vehicles, but proper application is crucial for optimal results. We’ve compiled answers to the most common questions to help you achieve a flawless finish.
What is the correct method for applying Adam’s Advanced Graphene Ceramic Coating?
The proper application of Adam’s Advanced Graphene Ceramic Coating involves a systematic approach. First, add a few drops of the coating to the included applicator pad.
Apply using a cross-hatch pattern – going left to right, then up and down. This ensures complete coverage and helps avoid missing spots.
Work in small sections of approximately 2×2 feet at a time. After applying, wait 1-2 minutes for the coating to flash (develop a rainbow appearance), then gently buff with a clean, high-quality microfiber towel.
What are the necessary preparation steps before applying Adam’s Graphene Ceramic Coating?
Thorough preparation is essential for the coating to bond properly. Start with a complete wash using a pH-neutral car shampoo to remove surface contaminants.
Clay bar the entire vehicle to remove embedded contaminants that washing can’t eliminate. Follow with paint correction to remove swirls, scratches, and imperfections.
The final prep step is crucial – use an isopropyl alcohol (IPA) solution or dedicated panel wipe to remove any remaining oils, polishes, or residues. The surface must be completely clean for proper bonding.
Can you provide tips on ensuring even application of Adam’s Advanced Graphene Ceramic Coating?
Working in a well-lit environment is critical for spotting high and low spots. We recommend using a handheld inspection light to check your work as you go.
Maintain consistent pressure on the applicator pad throughout the process. Too much pressure can cause uneven distribution, while too little may result in inadequate coverage.
Temperature and humidity significantly impact application. The ideal application temperature is between 60-75°F (15-24°C) with moderate humidity. Extreme conditions can affect the coating’s leveling properties and cure time.
What are the common pitfalls to avoid while applying graphene ceramic coatings?
Applying too much product is a common mistake. The coating should be applied very thinly – remember that more isn’t better and can lead to streaking and high spots.
Failing to remove the coating within the recommended time frame can make it difficult to buff off. Don’t let it dry too long before wiping, especially in warmer conditions.
Avoid applying in direct sunlight or on hot surfaces. This causes the coating to flash too quickly, making it challenging to level properly and potentially creating an uneven appearance.
How long should Adam’s Advanced Graphene Coating be allowed to cure, and what are the recommended conditions?
Adam’s Advanced Graphene Ceramic Coating requires a minimum 24-hour cure time before exposure to any moisture. The full curing process takes approximately 7 days to reach maximum hardness and protection.
During the curing period, keep the vehicle in a covered area, ideally a climate-controlled garage. Maintain temperatures between 60-75°F (15-24°C) if possible for optimal curing.
Avoid washing the vehicle or applying any additional products during the first 7 days. This allows the ceramic coating to properly cross-link and form the protective barrier it’s designed to create.
What maintenance is required after applying Adam’s Advanced Graphene Ceramic Coating?
For routine maintenance, use pH-neutral car shampoos that won’t degrade the coating.
Avoid harsh chemicals, including alkaline cleaners and degreasers.
We recommend applying a maintenance spray specifically designed for graphene ceramic coatings every 3 months. This helps rejuvenate the hydrophobic properties and extends the coating’s lifespan.
Regular maintenance washes should be performed every 2-3 weeks depending on driving conditions.
Prompt removal of contaminants like bird droppings, tree sap, and industrial fallout will prevent potential etching of the coating.
